How to Lay Artificial Grass on Concrete – A Step by Step Guide

How to Lay Artificial Grass on Concrete

Artificial grass quality and durability have come a long way since the early days. People used to replace their natural grass with artificial grass, but now most people are installing artificial grass on areas other than their lawns and backyards. You can lay artificial grass on concrete, block paving’s, and slabs with ease.

You can directly install artificial grass on top of concrete, slabs, and blocks without the need to remove the existing surface. Laying artificial grass on concrete is a far more straightforward process than installing artificial grass on other surfaces. Simpler installation process added with benefits of artificial grass makes this a preferred choice for homeowners who wants to decorate quickly and bring a new life to their dull outer space.

In this installation guide, we will show you how to lay artificial grass on concrete. We will cover every step that you need to make while installing artificial grass from the tools and materials required for preparing the concrete surface for installation.

Reasons to Cover your Concrete with Artificial Grass

Here are some benefits of having artificial turf on concrete surface.

  • Gives a new lease of life to your lawn and transform dull concrete into lush green natural grass.
  • Cost-Effective and Easy to Install.
  • Requires less maintenance.
  • Long-Lasting (Artificial grass can easily remain in condition for up to 15 years).
  • Environment Friendly.
  • Suitable for both Kids and Pets.

Important Consideration Before Laying Artificial Grass on Concrete

Before proceeding to the installation process, here are some crucial factors that you must consider before installing artificial grass on concrete.

Condition of Concrete: You need to access the concrete surface condition where you are planning to lay artificial grass. Minor defects and holes can be ignored or patched in a short time. However, if there are large cracks or loose sections of asphalt, then it is recommended to not install turf directly on this surface, you can use an underlay over the concrete to proceed with the installation.

Artificial Grass on Concrete Drainage: It is one of the most important factors, especially if you are laying artificial grass outdoors. Ideally, there should be a slight slope on your concrete surface that allows water to flow off.

How to Lay Artificial Grass on Concrete – DIY Tutorial

Step 1: Tools and Materials Required

In this first step, you have to collect all the tools and materials needed during installation.
Tools Required: Water Hose (Pressure Washer preferable), Broom, Stanley Knife, and paddle mixer.
Materials Required: Joining Tape, Artificial grass Glue, Underlay Foam (if required), and Artificial grass.

Step 2: Clean Concrete Surface

Now its time to clean the concrete surface where you are planning to install artificial turf. If you have any pressure washer available, then it will do the job efficiently and quickly.

Step 3: Install Drainage System

The best practice is installing turf on the surface with a slight slope that water can easily follow through. You can quickly check this while cleaning the concrete surface. If you see any water puddles, then it is recommended to drill the holes of size around 15 mm to prevent water puddles forming.

Step 4: Lay Artificial Grass Underlay for Concrete (if required)

If your application area is not smooth or not in good condition, then installing the underlay to create a flat surface for turf application is recommended. Cover the entire surface area with underlay foam and apply glue so that foam can settle correctly on the concrete surface.

Step 5: Roll Artificial Grass and apply Joins

Now its time to roll down synthetic grass on the surface. Make sure to cover all the surface area carefully and cut extra grass around the edges. Now the join grass using joining tape and let it cure.

Step 6: Apply Glue

Carefully apply the adhesive to the bottom surface so that fake grass forms a bond with the surface. Stay off from grass for the next few hours.

Step 7: Add Sand

Once the turf gets secured with the surface, you have to add dry sand to your grass at 3-5 kg /sqm as it will ensure the base of Artificial grass and help grass blades maintain its shape and position when it comes to under heavy usage. Now brush the grass to get rid of extra sand.

Your artificial grass is now ready for use.

How to Lay Artificial Grass on uneven Concrete

If you are planning to install artificial grass on the surface that is uneven or not in good shape, then it is advised to add a foam underlay or shock pad over your uneven concrete surface.
This underlay ensures that there is an ideal smooth surface to the application of artificial grass.

This installation guide describes how to lay artificial grass on concrete; if your surface area is different, then you can check this guide about How to Install Artificial Grass.

 

 

Leave a Comment